Facebook

EN.
Gigabit Industrial POE Switch

Products

Products

Gigabit Industrial POE Switch

5×10/100/1000Base-TX POE Switch

Model:GWTP51015

  • Unmanaged industrial PoE fiber switch with 4*10/100/1000M RJ45 ports and 1*1000M RJ45 uplink port, Port 1-4 can support IEEE802.3af/at PoE. Support DC dual power supply input and DIN rail mounting.
  • Product Introduction
  • Technical Parameter
  • Document download

GWTP51015 series is a full gigabit industrial POE switch independent development by GWT. It has 4*10/100/1000M RJ45 ports and 1*1000M RJ45 uplink port, Port 1-4 can support IEEE 802.3af/at standard PoE power supply. the maximum PoE output power is less than 60W(at-120W).  As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, web camera, VoIP phone, industrial sensor through network cable, and meet the network environment that needs high-density PoE power supply. It is suitable for intelligent transportation, rail transit, electric power, mining, metallurgy and green energy. Industrial scenes such as construction set up a cost-effective and stable communication network.

Unmanaged model, plug and play, no configuration, easy to use.

Physical Port
Copper Port4*10/100/1000Base-T PoE ports (Data/Power)
1*1000Base-X uplink RJ45 port (Data)
2 set of V+, V- redundant DC power interface (5Pin Phoenix terminal)
Parameters
Ethernet StandardsIEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX/100BASE-FX

IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet over Fiber Optic

IEEE 802.3x flow control and back pressure

IEEE 802.3af Power over Ethernet. IEEE 802.3at Power over Ethernet enhancements standard

Packet Buffer1Mbits
Packet Length2046bytes
MAC Address Table8K
Transmission ModeStore and Forward (full/half duplex mode)
Exchange PropertyDelay time: < 7ps

Backplane bandwidth: 20Gbps; Packet forwarding rate: 14.88Mpps

PoE
PoE StandardIEEE802.3af/at
Ethernet Port FeaturePort 1-4 support 10/100/1000Base-T,auto-sensing,Full/half duplex MDI/MDI-X self-adaption
Power BudgetMax. PoE output power budget 30W
Power Supply PinDefault:1/2 (+), 3/6 (-) optional: 4/5(+),7/8(-)
Working Voltage48-57VDC; 5P industrial phoenix terminal, anti-reverse protection
PoE PowerNo, optional 48V/60W or 48V/120W industrial power supply
PoE ModePoE Output
Power Information
Power SupplyInput power 48VDC (44~56VDC) for IEEE802.3af

Input power 52VDC (40~56VDC) for IEEE802.3at

Power ConsumptionFull-load<3W
Physical Property
Protection GradeIP40 aluminum case
Cooling ModeNatural cooling, no fan design
Dimensions120mmx90mmx35mm
Installation ModeDIN trail/wall-mountable
Weight400g
Working Environment
Operating Temperature-40°C~75°C
Operating Humidity10%~90% non-condensing
Storage Temperature-40°C~85°C
Warranty
MTBF50,000 hours
Defects Liability Period5 year warranty, lifetime technical support
Certification Standard
EMCFCC Part15 Class A

CE-EMC/LVD

RoHS

EN61000-4-2 (ESD), EN61000-4-3 (RS)

EN6100044 (EFT), EN6100045 (Surge)

EN61000^1-6 (CS), EN61000-4-8

EN61000-4-11

VibrationIEC60068-2-6 

-40~75°C High and Low Temperature Test

IP40 Protection Test