Products
DIN rail Managed Industrial Switch
8×10/100/1000Base-TX + 4×1000Base-FX SFP
Model:GWT71418
GWT71418 is a new generation Industrial PoE Managed Switch with 8-Port 10/100/1000Base-TX and 4-Port 1000Base-FX Fast SFP that provide stable and reliable Ethernet transmission offered by GWT, with high quality design and reliability. It is positioning in the broadband network intervention market, to offer and realize Ethernet data exchange, convergence and long-distance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users. The industrial switch complies with various characteristics such as mini size, no fan, low power consumption, high reliability and stability, and easy to maintain.
GWT71418 can offer redundant mechanisms for critical applications that need always-on connections. It can also operate either at standard operating temperature range -40 to 75°C. Housed in rugged DIN rail or wall mountable IP40 enclosures, these switches are perfect choices for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and are also suitable for many
military and utility market applications where environmental conditions exceed commercial product specifications.
High Heat Dissipation Design For Prolong Life
Aluminum case for better heat dissipation and industrial grade temperature -40°~75°, also, the casing is IP40 dust proof and DIN Rail mountable, good for outdoor applicaiton.
Thermally conductive pad connected to PoE and main chipset, and the both side chipset is closely fit to the aluminum case, and the casing is striping style to get the most dissipation performance, so the whole design is very precise and delicate.
R&D User-Friendly Software
SNMP & DHCP
Active SNMPv3, RMON, and Dynamic Host Control Protocol (DHCP). This gives the IT department the ability to add the managed switch to the network, communicate to the managed switch using SNMP, monitor remote traffic and notifications using RMON, and automatically configure IP addresses of the switch and end devices.
GUI Management
Provides users with an intuitive and easy-to-use interface and immediate visual feedback, a GUI also allows a user to open up multiple programs or instances and displays these simultaneously.
The ease of use of GUIs has made it possible for the public in general, regardless of experience or knowledge, to access all kinds of systems for everyday use.
ERPS RING
Supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions.
ERPS has a few distinct advantages over RSTP and MSTP. The most obvious is convergence time. Beyond that, the G.8032 protocol is the most universal of the three, and it is available on a wider range of hardware.
There is no theoretical limit on the number of rings that can be added to a network. So as long as you have sufficient bandwidth, you can keep adding nodes.
High Effective PoE+ Solution Especially Suitable For Security Monitoring
AI PoE
Automatic self checking, reboot the device while find it fake dead
Three POE Mode
Disabled , Enable POE , Enabled POE+.Provide both 15.4-watt IEEE 802.3af devices and 30-watt IEEE 802.3at devices without power-socket restriction to provide high-speed transmissions at the same time.
PoE Timing Function
PoE schedule and timing for each PoE port, to extend switch life and reduce power consumption by setting a priority mode for each port. which is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.
PoE Budget
Up to 350W, with 4M Buffer Differ your Video Surveillance
Physical Port | ||
RJ45 Port and Speed | 8x10/100/1000Base-Tx | |
Fiber Port and Speed | 4x100/1000Base-Fx SFP | |
Console | 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) | |
Parameters | ||
Ethernet Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service
| IEEE 802.1Q VLAN tagging IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP ITU G.8032 ERPS Ring RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 |
Packet Buffer | 4Mbits | |
Packet Length | 10Kbytes | |
MAC Address Table | 8K | |
Transmission Mode | Store and Forward (full/half duplex mode) | |
Switch Fabric | 24Gbps/non-blocking | |
Exchange Property | Delay time: < 7ps Backplane bandwidth: 20Gbps; Packet forwarding rate: 14.88Mpps | |
PoE (Optional) | ||
PoE Standard | 8xIEEE 802.3af/IEEE 802.3at PoE | |
Power Budget | Max. PoE output power budget 30W | |
LED Indicator | ||
Power | Connect-always | |
RJ45 | Link/Act: connect-always; data exchange-twinkle | |
Fiber | Link/Act: connect-always; data exchange-twinkle | |
Power Information | ||
Power Access Mode | Phoenix terminal | |
Redundant Power Input | DC 9-56V | |
Overload Protection | Yes | |
Power Reverse | Support | |
Power Consumption | Full-load<12W | |
Physical Property | ||
Protection Grade | IP40 aluminum case | |
Cooling Mode | Natural cooling, no fan design | |
Dimensions | 138mmx108mmx49mm | |
Installation Mode | DIN trail/wall-mountable | |
Weight | 650g (With PoE: 700g) | |
Working Environment | ||
Operating Temperature | -40°C~75°C | |
Operating Humidity | 5%~90% non-condensing | |
Storage Temperature | -40°C~85°C | |
Warranty | ||
MTBF | 500,000 hours | |
Defects Liability Period | 5 year warranty, lifetime technical support | |
Certification Standard | ||
EMC | FCC Part15 Class A CE-EMC/LVD RoHS EN61000-4-2 (ESD), EN61000-4-3 (RS) EN6100044 (EFT), EN6100045 (Surge) EN61000^1-6 (CS), EN61000-4-8 EN61000-4-11 | |
Vibration | IEC60068-2-6 -40~75°C High and Low Temperature Test IP40 Protection Test | |
Software Features | Redundant network: STP, RSTP, MSTP, IT-T G.8032 Ethernet Ring Protection Switching (ERPS)for redundant cabling ERPS/ Ring for Redundant Cabling, recovery time<20ms in 250 devices Multicast: IGMP snooping V1/V2/V3 VLAN: IEEE 802.1Q4K VLAN, GVRP, GMRP, QINQ Link Aggregation: Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation Management Function: CLI, Web based management, SNMP v1/v2c/v3, Telnet/SSH server for management Diagnostic Maintenance: Port mirroring, Ping Alarm management: 1 way relay alarm output, RMON, SNMP Trap RMON, MIBII, Port mirroring, Event syslog, DNS, SNTP, IEEE 802.1ab LLDP Security: DHCP Server/Client/Relay option 82/Snooping User hierarchical management Flexibility security: Port based and MAC based IEEE 802.1X, ACL, HTTP/HTTPS, SSL/SSH v2 Data control Port-based ingress/egress speed limit, Full duplex IEEE 802.3x, half duplex back-pressure flow control. Broadcast storm suppression, Un known-Multicast suppression and Unknown-Unicast suppression Software upgrade via HTTP, redundant firmware to avoid upgrade failure |