Products
HD-SDI Transmission
HD-SDI optical transmitter and receiver
GWTHDI1V is a multi-service transmission device which can transfer real-time HD-SDI, audio, data, alarm switching value and Ethernet signals. Compared with the traditional HD-SDI fiber transmitter and receiver, it has the advantages of high capability, multi-service and low cost. This series of products is widely used in city security, high way, rail way, electrical power, petroleum and petrochemical field and other industries which demand real time HD surveillance.
Feature
Uses non-WDM technology to transmit multi-channel HD-SDI high definition video signals and multi-channel physical isolation 100M Ethernet signal through one core cable
Provides uncompressed, real-time, smooth image
Compatible with SMPTE-292M HD-SDI, supports 1.485Gbps rate
Supports 1080P@30/25/24, 1080I@60/50, 720P@60/50/30/25/24 and other video formats
Meets electromagnetic compatibility standard of industrial IV level, working stably and reliably in harsh electrical environment
A wide range of operation temperature -40℃~+85℃
Assisting functions such as audio, data, alarm and Ethernet
Standard SNMP network management, easy for remote network upgrade and maintenance
All interfaces support plug and play, hot swap, adjustment-free installation
SPECIFICATION | ||
Video | Standard | SMPTE-292M HD-SDI standard |
Rate | 1.485Gb/s | |
Output impedance | 75Ω | |
Return loss | >15dB | |
Power level | 800mVp-p ± 10% | |
Interface | BNC | |
Video memory | <0.8ns | |
SD-SDI aiming jitter (1KHz~27MHz) | <0.2UIp-p | |
SD-SDI timing jitter (10Hz~27MHz) | <0.2UIp-p | |
HD-SDI aiming jitter (100KHz~148.5MHz) | <0.2UIp-p | |
HD-SDI timing jitter (10Hz~148.5MHz) | <1.0UIp-p | |
Optical performance | Output/Input wavelength | 1310nm/1550nm |
Transmission power | +2dBm~-3dBm, 0dBm~-5dBm, -8dBm~-15dBm, | |
Sensitivity | Better than -24dBm | |
Interface | LC/SC/FC | |
Fiber mode | Single mode or multiple mode | |
Transmission distance | 20/40/80km | |
Data (optional) | Output/Input wavelength | 1310nm/1550nm |
Transmission power | +2dBm~-3dBm, 0dBm~-5dBm, -8dBm~-15dBm | |
Sensitivity | Better than -24dBm | |
Interface | LC/SC/FC | |
Fiber mode | Single mode or multiple mode | |
Transmission distance | 20/40/80km | |
Data (Optional) | Data format | RS-232/422/485 |
Data baud rate | 0~115.2Kbps | |
Data sample frequency | 2MHz | |
Symbol error rate | <10-9 | |
Connector | PHOENIX | |
Audio (optional) | Sample frequency | 32KHz |
Audio sample encoding | 18bit | |
Input impedance | High impedance (non equilibrium) | |
Output impedance | 75Ω (non equilibrium) | |
Max input/output voltage | 3.5Vp-p | |
Insertion gain | 0dB±1dB | |
Frequency response | 0.07~14KHz@3dB | |
SNR | ≥85dB (weighting) | |
Audio intercom | Support Aiphone, Lonbon Half-Duplex intercom system | |
Switching value (optional) | Interface | PHOENIX |
Input signal | Active or passive switching value | |
External feed | 12V | |
Output signal | Relay switch output | |
Output load | 1A@30VDC or 0.5A@125VAC |