Facebook

EN.
Managed Industrial PoE Switch

Products

Products

Managed Industrial PoE Switch

16×10/100/1000Base-TX + 8x1000Base-FX SFP Managed POE Switch

Model:GWTP718116

  • Product Introduction
  • Technical Parameter
  • Document download

GWT718116 is a new generation Industrial PoE Managed Switch with 16-Port 10/100/1000Base-TX and 8-Port 1000Base-FX Fast SFP that provide stable and reliable Ethernet transmission offered by GWT, with high quality design and reliability. It is positioning in the broadband network intervention market, to offer and realize Ethernet data exchange, convergence and long-distance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users. The industrial switch complies with various characteristics such as mini size, no fan, low power consumption, high reliability and stability, and easy to maintain.

GWT718116 can offer redundant mechanisms for critical applications that need always-on connections. It can also operate either at standard operating temperature range -40 to 75°C. Housed in rugged DIN rail or wall mountable IP40 enclosures, these switches are perfect choices for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and are also suitable for many
military and utility market applications where environmental conditions exceed commercial product specifications.

 

High Heat Dissipation Design For Prolong Life

Aluminum case for better heat dissipation and industrial grade temperature -40°~75°, also, the casing is IP40 dust proof and DIN Rail mountable, good for outdoor applicaiton.

Thermally conductive pad connected to PoE and main chipset, and the both side chipset is closely fit to the aluminum case, and the casing is striping style to get the most dissipation performance, so the whole design is very precise and delicate.

 

R&D User-Friendly Software

SNMP & DHCP

Active SNMPv3, RMON, and Dynamic Host Control Protocol (DHCP). This gives the IT department the ability to add the managed switch to the network, communicate to the managed switch using SNMP, monitor remote traffic and notifications using RMON, and automatically configure IP addresses of the switch and end devices.

GUI Management

Provides users with an intuitive and easy-to-use interface and immediate visual feedback, a GUI also allows a user to open up multiple programs or instances and displays these simultaneously.
The ease of use of GUIs has made it possible for the public in general, regardless of experience or knowledge, to access all kinds of systems for everyday use.

ERPS RING

Supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions.
ERPS has a few distinct advantages over RSTP and MSTP. The most obvious is convergence time. Beyond that, the G.8032 protocol is the most universal of the three, and it is available on a wider range of hardware.

There is no theoretical limit on the number of rings that can be added to a network. So as long as you have sufficient bandwidth, you can keep adding nodes.

 Application-of-Industrial-PoE-Switch.png

High Effective PoE+ Solution Especially Suitable For Security Monitoring

AI PoE

Automatic self checking, reboot the device while find it fake dead

Three POE Mode

Disabled , Enable POE , Enabled POE+.Provide both 15.4-watt IEEE 802.3af devices and 30-watt IEEE 802.3at devices without power-socket restriction to provide high-speed transmissions at the same time.

PoE Timing Function

PoE schedule and timing for each PoE port, to extend switch life and reduce power consumption by setting a priority mode for each port. which is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.

PoE Budget

Up to 350W, with 4M Buffer Differ your Video Surveillance

 

Physical Port
RJ45 Port and Speed16x10/100/1000Base-Tx PoE RJ45 ports (Data /Power)
Fiber Port and Speed8x1000Base-Fx SFP
Console1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Parameters
Ethernet StandardsIEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX/100BASE-FX

IEEE 802.3z Gigabit SX/LX

IEEE 802.3ab Gigabit 1000T

IEEE 802.3x flow control and back pressure

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3ad port trunk with LACP

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.1s Multiple Spanning Tree Protocol

IEEE 802.1p Class of Service

 

IEEE 802.1Q VLAN tagging

IEEE 802.1ad Q-in-Q VLAN stacking

IEEE 802.1x Port Authentication Network Control

IEEE 802.1ab LLDP

ITU G.8032 ERPS Ring

RFC 768 UDP

RFC 793 TFTP

RFC 791 IP

RFC 792 ICMP

RFC 2068 HTTP

RFC 1112 IGMP v1

RFC 2236 IGMP v2

Packet Buffer4Mbits
Packet Length10Kbytes
MAC Address Table8K
Transmission ModeStore and Forward (full/half duplex mode)
Switch Fabric24Gbps/non-blocking
Exchange PropertyDelay time: < 7ps

Backplane bandwidth: 20Gbps; Packet forwarding rate: 14.88Mpps

PoE
PoE StandardIEEE802.3af/at
Ethernet Port FeaturePort 1-8 support 10/100/1000Base-T,auto-sensing,Full/half duplex MDI/MDI-X self-adaption
Power Supply PinDefault:1/2 (+), 3/6 (-) optional: 4/5(+),7/8(-)
Working Voltage48-57VDC; 6P industrial phoenix terminal, anti-reverse protection
Power BudgetMax. PoE output power budget 30W
PoE PowerNo, optional 48V/60W or 48V/120W industrial power supply
PoE ModePoE Output
LED Indicator
PowerConnect-always
RJ45Link/Act: connect-always; data exchange-twinkle
FiberLink/Act: connect-always; data exchange-twinkle
Power Information
Power SupplyInput power 48VDC (44~56VDC) for IEEE802.3af

Input power 52VDC (40~56VDC) for IEEE802.3at

Overload ProtectionYes
Power ConsumptionFull-load<12W
Physical Property
Protection GradeIP40 aluminum case
Cooling ModeNatural cooling, no fan design
Dimensions160mmx132mmx70mm
Installation ModeDIN trail/wall-mountable
Weight1300g 
Working Environment
Operating Temperature-40°C~75°C
Operating Humidity5%~90% non-condensing
Storage Temperature-40°C~85°C
Warranty
MTBF500,000 hours
Defects Liability Period5 year warranty, lifetime technical support
Certification Standard
EMCFCC Part15 Class A

CE-EMC/LVD

RoHS

EN61000-4-2 (ESD), EN61000-4-3 (RS)

EN6100044 (EFT), EN6100045 (Surge)

EN61000^1-6 (CS), EN61000-4-8

EN61000-4-11

VibrationIEC60068-2-6

-40~75°C High and Low Temperature Test

IP40 Protection Test

Software FeaturesRedundant network:

STP, RSTP, MSTP, IT-T G.8032 Ethernet Ring Protection Switching (ERPS)for redundant cabling

ERPS/ Ring for Redundant Cabling, recovery time<20ms in 250 devices

Multicast: IGMP snooping V1/V2/V3

VLAN: IEEE 802.1Q4K VLAN, GVRP, GMRP, QINQ

Link Aggregation: Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation

Management Function: CLI, Web based management, SNMP v1/v2c/v3, Telnet/SSH server for management

Diagnostic Maintenance: Port mirroring, Ping

Alarm management: 1 way relay alarm output, RMON, SNMP Trap

RMON, MIBII, Port mirroring, Event syslog, DNS, SNTP, IEEE 802.1ab LLDP

Security: DHCP Server/Client/Relay option 82/Snooping User hierarchical management

Flexibility security: Port based and MAC based IEEE 802.1X, ACL, HTTP/HTTPS, SSL/SSH v2

Data control Port-based ingress/egress speed limit, Full duplex IEEE 802.3x, half duplex back-pressure flow control.

Broadcast storm suppression, Un known-Multicast suppression and Unknown-Unicast suppression

Software upgrade via HTTP, redundant firmware to avoid upgrade failure